This artilce walks you through setting up the Logitech Mevo 2.0 App with sidelineHD to enable smooth and reliable live streaming. It covers configuration steps, connection settings and usage tips to ensure your streams run without interruption.
Streaming with Mevo 2.0 app and sidelineHD
What You Will Need
- A Mevo Camera
- The Mevo 2.0 App on iOS or Android
Setting up your Mevo 2.0 App
- Power up your mevo device by pressing and holding the power button for three seconds
- The white LED lights will pop on and start blinking as it initializes
- For questions about your Mevo Device, visit Mevo Support
- Login to your sidelineHD Account
- Select your Team Card
- At the top right of your team page, select Settings
- Select Stream Settings
- Select Camera Settings
- Select the three dots to the right of your camera
- If you do not already have a camera enabled here, select the Mevo button to add a new camera.
- Select Reconfigure Camera button
- Select the Open in Mevo App button
- You'll see a Go live with sidelineHD and Mevo screen that displays your stream URL and stream key.
- Select the blue Launch Mevo App button
- Select the Connect button
Livestream with Mevo 2.0 App
- Toggle to select Wi-Fi or Cellular Data:
-
Wi-Fi ~ We suggest Wi-Fi if you have a stand along hotspot/Mifi or if you plan to use your personal hotspot from a different cell phone.
- Click on Stream via Wi-Fi
- You will be prompted to locate and click on your Wi-Fi network
-
Cellular Data ~ To use your phones data plan, select Cellular Data.
- Click on Stream via Cellular Data
- Click JOIN on any pop up menus
-
Wi-Fi ~ We suggest Wi-Fi if you have a stand along hotspot/Mifi or if you plan to use your personal hotspot from a different cell phone.
- To Go live, press the Red Circle in the bottom left-hand corner
- Select the sidelineHD Logo
- Select your sidelineHD Camera
- Set your resolution by tapping on the resolution box
- We recommend 720p or lower
- Press the Go LIVE button
If everything is working correctly, you should receive a Stream Up text message from sidelineHD within 30 seconds!
We recommend keeping the Mevo App on screen so you can monitor the stream, even if connected to a hotspot.
SLHD TIP:
Once your sidelineHD connection has been added in your Mevo app, it is saved there for future use.
If you get repeated up/down messages, it's likely because your connection does not have enough bandwidth. Downshift to 480p or 360p, stop your stream by sliding the red circle to the right, and then tap the resolution box, choose 480 or 360, and press Go live again.
Comments
0 comments
Article is closed for comments.